Polyethylene therephthalate glycol
Back to maretials
Maximal size for series production
250 x 210 x 210 mm
Maximal size for prototyping
275 x 390 x 300 mm
Heat distortion temperatur (at 0.45MPa)
68 C°
Tensile strengthe at break
45 MPa
Elongation at break
25 %
Flexural modulus
1600 MPa
Izod impact strength (at 23°C, notched)
11 kJ/m²

PET-G is the most versatile plastic for 3D printers. It is characterized by high resistance to chemicals and solvents. It has a low shrinkage rate when cooled and therefore the products maintain high dimensional accuracy. Thanks to this, it is also suitable for printing larger sizes, which is difficult, for example, with ABS or ASA. It is not suitable for more temperature intensive applications due to operating temperatures arround 70 ° C.